Reply to thread

Message: [QUOTE="Kwackers, post: 223486, member: 19865"] I had the same problem with a stuck bolt on a Cr125, tried everything, heating, freezing bolt, lump hammer. Eventually I had to buy a really thin 0.5mm disc and cut the bolt through both sides between the frame and the suspension linkage. Just to see how stuck the bolt was I placed it in a 6" vice and pounded it with a sledge hammer. It still wouldn't budge from the sleeve it had welded itself to ! It sits in my garage as a "sword in the stone" challenge to any who wish to try. [/QUOTE]