Reply to thread

Message: [QUOTE="Rich Rohrich, post: 334870, member: 16241"] With light gauge tubing I've had pretty good luck filling the tube tight with [b]dry[/b] sand capping the ends of the tube and using heat to facilitate making the bends. As Dave suggested mandrel bending is the best solution if you can convince someone local to do it for you. You can also talk to Aircone 702-566-1077. They can make up anything to your spec for a reasonable price, or talk to Burns Stainless 949-631-3184 if you want to go full metal trick. [/QUOTE]