bclapham
LIFETIME SPONSOR
- Nov 5, 2001
- 4,340
- 0
OK guys, i am interested to hear what the usual suspects have to say about this!:)
i have aquired a FMF Rev pipe for this rm144 i am building. So, i need to figure whicj silencer to buy? I might be able to score a stock silencer, but if not, i will buy either the FMF power core or corresponding shorty unit.
although i am not a fast rider, i am hoping this pippe will help the bike rev a bit, are there any pro's or cons to the silencer choice???? will the shorty clash with the higher rpm pipe etc., etc.? if i manage get the stocker, should i resist shortening it?
ps. i am sure Rich R will have a look in here, can you remember a ball park jetting spec for this bike? not looking for a handout rather a ball park so i know which jets to get at the shop. if its any use, we have set up a stock 02rm125 with the tmx 38 carb on pump here with 27.5P 2nd clip and 430 main. i will be using a bruce-brew similar to what you might have tried.
thanks in advance
i have aquired a FMF Rev pipe for this rm144 i am building. So, i need to figure whicj silencer to buy? I might be able to score a stock silencer, but if not, i will buy either the FMF power core or corresponding shorty unit.
although i am not a fast rider, i am hoping this pippe will help the bike rev a bit, are there any pro's or cons to the silencer choice???? will the shorty clash with the higher rpm pipe etc., etc.? if i manage get the stocker, should i resist shortening it?
ps. i am sure Rich R will have a look in here, can you remember a ball park jetting spec for this bike? not looking for a handout rather a ball park so i know which jets to get at the shop. if its any use, we have set up a stock 02rm125 with the tmx 38 carb on pump here with 27.5P 2nd clip and 430 main. i will be using a bruce-brew similar to what you might have tried.
thanks in advance