T the_big_1 Member May 24, 2007 2 0 May 25, 2007 #1 Dear all, Is there an easy way to set the mixture screw on a 2 stroke to get it pretty much right? I know the "1 1/2" turns out etc but is this spot on or is there a better mthod i.e engine tick over speed etc.
Dear all, Is there an easy way to set the mixture screw on a 2 stroke to get it pretty much right? I know the "1 1/2" turns out etc but is this spot on or is there a better mthod i.e engine tick over speed etc.
F Filthy_McNasty Member May 9, 2007 104 0 May 26, 2007 #2 You set it by feel. Ride the bike, and play with the screw until you find the setting that provides the best response when opening the throttle. If you end up less than 1 turn open or more than 2.5 turns open your pilot jet is the wrong size.
You set it by feel. Ride the bike, and play with the screw until you find the setting that provides the best response when opening the throttle. If you end up less than 1 turn open or more than 2.5 turns open your pilot jet is the wrong size.
S sharky_101 Member Mar 14, 2007 25 0 May 26, 2007 #3 turning the screw out (anti-clockwise) means it lets more air in right? can i get an amen to that?