Thanks Trailrider, you must be right. A quick search on the web tells me that cam lub or break-in lube are also known as Molybdene Disulfide LUBRICANTs. Not sure why the service manual says GREASE.
I was just checking out if you guys knew your stuff... ;)
One last thing that I should of asked in the first place:
Do you guys apply a thin film of silicon on the base and head gaskets when you reassemble the top end ? Looks like Kawasaki did not apply any at the factory. As well, the service manual doesn't specify this step. So, I guess, none is required. Right?