Reply to thread

Message: [QUOTE="canyncarvr, post: 583605, member: 16552"] Back to the basics of your question: An 'H' model kdx200 that you want more bottom end from. Considering your bike to be mechanically sound, the first response from kdxmann is a big deal. The 200 won't have bottom end for diddle with the -30 (rev) pipe. There are two choices from that point. Either off the -30 in preference for a -35 (torque pipe), or for a bit less money you could put in a deltaforceII reed cage system with the reeds set to low tension. [b]That[/b] is the [b]only[/b] setup I've come across that makes the -30 pipe useable in the woods on my 200. AND, you get to keep the 'fun' factor of the rev pipe. You get to have your cake and eat it too! [/QUOTE]