Reply to thread

Message: [QUOTE="Tom H, post: 586354, member: 19742"] I am on my first time splitting cases on a '90 KDX 200. I bought a fly wheel puller, and got it off. The right side and left side are completely stripped of stuff and bare. (Probably removed more than I need to), I got all 10 crankcase bolts out, and I can't just get the cases apart. The tranny area splits a fraction of an inch, but the crankshaft area seems glued together. I have held it in the air had my son rap on it with a rubber mallet, but it don't come apart. I am too chicken to try wedging a pry bar in between the cases, although I suspect you could do that at the motor mounts without causing severe damage. The only thing I can see that I haven't removed is a snap ring on the clutch side of the counter shaft, but it appears the sprocket side of that shaft should pull free. I figured I better stop and ask for help before I do something stupid. Anybody got an idea what I should do next? Thanks [/QUOTE]