Need a place to rebuild my rear shock

M

m5shooter

Member

Jan 19, 2009

1

0

• Jan 19, 2009

• #1

I got a KDX 200 and the shock sags a bit about 2 inches when i'm off the bike so i think i need to have it rebuilt, is there a shop that does this kind of work for a reasonable price.

Also any place that has a kit to mount front and rear turn signals on a rechargable battery with the handle bar controls.

I know Baja Designs sells a kit but it is almost $500 a bit more than i can afford and all i need are the turn signals.

Im not that good with a wrench so a kit that's plug and play would be nice.

 

IndyMX

Crash Test Dummy

~SPONSOR~

Jul 18, 2006

5,548

2

Amo, IN

• Jan 19, 2009

• #2

Sounds more like you need to look at the spring. Either set the static sag properly, or replace the spring.

 

M

mudpack

Member

Nov 13, 2008

637

0

• Jan 19, 2009

• #3

Indy is right.
BTW, how much is "about 2 inches"? ProCircuit recommends 30-40mm static sag. 40mm is 1.6". You may not be far off...

 

G

glad2ride

Member

Jul 4, 2005

1,071

1

• Jan 19, 2009

• #4

Check the preload ring adjustment to be sure.

 

H

HartlandMI

Member

Nov 13, 2008

12

0

• Jun 17, 2009

• #5

it shouldn't be sagging at all when you're not on the bike though, should it? I'm having the same problem with a CR85. When I get off the bike it doesn't rise all the way up. I can lift it higher. Any ideas?

 

S

sr5bidder

Member

Oct 27, 2008

1,463

0

• Jun 17, 2009

• #6

its fine read static sag and race sag on google