I give up
Hey guys, Thanks for the suggestions, I really appreciate it.
Well... at this point im about ready to try a new carb!
After I let the bike completely warm up, (air filter removed) and held the thottle about 1/8 open to keep running (at a constant RPM)...
1) I screwed the idle speed screw althe way in, then almost all the way out.
This had NO EFFECT on the idle speed or the mixture. (still holding throttle at 1/8 open)
2) I completely removed the air screw all together, this had NO EFFECT on the mixture or idle speed! (still hoplding at 1/8 open) the RPM's didn't even change!?
3) I tried putting the richer pilot jet back in, but again this had no effect.
4) I have leaned all of the jets a few steps leaner, and moved the needle clip leaner (not a new needle though), and still NO EFFECT.
And just for grins :D I might try heavin the darn thing off a cliff! (That'l solve my problem)
Thanks again for the suggestions, they are much appreciated.
I think I might just try a new carb if i can find one cheap at a salvage yard,
unless anyone has any idea what would cause these symptoms besides the carb (am I overlooking something?)