Reply to thread

Message: [QUOTE="Baker1, post: 1060982, member: 69626"] The PW80 "governor" is an exhaust-restriction washer between the ex port and the pipe. I checked for that; it had already been removed. The bike's running fine now with the e-clip set in the richest position (4th notch) and a 120 main. It's a little smoky. Since I combined a total carb clean-up with moving the e-clip, I can't say for sure which effort cured my ills until I try to move the clip back to the third notch. Some day when I have time, I may look at that, and also at removing the oil injection system completely and running pre-mix. The available adjustments for oil mix are pretty poor on this bike. Easy to make it richer, impossible to make it leaner than stock. I'm gonna monitor oil consumption, see if it's way richer than 50:1. If so, I'll remove the pump. [/QUOTE]