Reply to thread

Message: [QUOTE="Rich Rohrich, post: 1300592, member: 16241"] 12 psi front and rear is a good starting point to work from. Here's a recommendation direct from Dunlop : [i]Here’s a quick general guideline: * Hard pack: 11.5 psi front, 11 psi rear. This would be for normal supercross-type conditions with no rocks or large square edged bumps. * Intermediate: 12 psi front, 13 psi rear. * Sand/Mud: 12 psi front, 10 psi rear. The lower pressure will help get a bite in the sand and slippery wet conditions. If it is rocky and muddy we would not suggest 10 psi in the rear.[/i] Ordering the bearing from a Honda dealer like [url]www.servicehonda.com[/url] is the best way to ensure you are getting the proper bearing without any hassles. [/QUOTE]