need some help....again

B

blarf

Member

Aug 10, 2006

93

0

• Sep 10, 2006

• #1

ok, i'm in the process of repacking my fmf silencer(with spark arrestor). i took the canister off, and all the nasty stuff inside. i also took the other end off the canister off. now, how do i clean the inside of the canister?. how to i clean the tube to prep for new material?

thank you,

thomas

 

S

Sawblade

Timmy Timmy Timmy!

Sep 24, 2000

1,491

0

• Sep 11, 2006

• #2

blarf said:

ok, i'm in the process of repacking my fmf silencer(with spark arrestor). i took the canister off, and all the nasty stuff inside. i also took the other end off the canister off. now, how do i clean the inside of the canister?. how to i clean the tube to prep for new material?

thank you,

thomas

Click to expand...

Grab a wire brush and have at it! :)

 

B

blarf

Member

Aug 10, 2006

93

0

• Sep 11, 2006

• Thread starter
• #3

should i use any cleaning products?

 

darringer

LIFETIME SPONSOR

Dec 2, 2001

1,029

0

• Sep 11, 2006

• #4

I always use a torch and burn the old residue out. It catches fire and burns until all that is left is ash. Then I wire brush it off. Looks like brand new.

 

Y

YZThumper

~SPONSOR~

Aug 6, 2001

145

0

• Sep 11, 2006

• #5

If you can get someone to sandblast or glass-bead it, I would highly recommend it :cool: . My father works in a shop with a glass beader, and have used him to clean the inner part of my silencer. It tooks about 5 minutes and came out perfectly clean !!