new member, old husky rider

[mycoldfeet]

Hi, just joined up and liked what I've read from everyone, originally from southern Cal. but now a paramedic in southwest Louisiana. Used to turn wrenches on CZ jawas Ducatti and Kawasaki many moon ago, just bought an old 86 CR 500 Husqvarna, got a street scooter but always liked to get dirty. Its been awhile since ive turned a wrench on a husky.....before 86 is all I'say lol, but I do need some input on a grabbing clutch, tried the adjustment on cable but is there an internal adjustment screw...ect noticed a bit of slop in the pivot arm on the motor the cable attaches to any info would be helpful thx.

 

[Tony Eeds]

Welcome to the site :cool:

Be sure and go to your User CP and update information relating to your location, type of riding, etc. We will do our best to hook you up with some fellow dirt bike enthusiasts.

We have members scattered along the Gulf Coast of Louisiana. Watch the Southern Spodes and Places To Ride / Organized Rides forums for some opportunities to hook up with fellow DRNers.

We have a member with a couple of CZs. He may pick your brain!

Again, welcome to the site, and shout if you have any questions!

 

[kmccune]

Welcome, there is a forum for the grabby clutch

General Bike repair ..... Click it http://dirtrider.net/forums3/forumdisplay.php?f=37

But it sounds like the clutch basket is grooved. Click the link, they will give you better/more advice. :cool: