Reply to thread

Message: [QUOTE="steve125, post: 952365, member: 20272"] Yes, you need an OHM meter though. Check your manual to see what the spec is, its usually a range the measurement needs to be within. If your having low power in the mid to top RPM ranges, the air screw will make little to no difference. The float level is a long shot to solving your problem. If the level is high you would be having a flooding/fouling problem. You would also notice an excess of fuel out of the drain hoses. Power would feel weak throughout the range. If the level is to low, it would feel like its always running out of fuel. The plug would look very clean and white. The bike would also tend to ping and over heat. Power would feel strong at times but mostly it will surge and feel erratic. [/QUOTE]