Reply to thread

Message: [QUOTE="steve125, post: 952557, member: 20272"] Im not saying it's impossible, just a long shot. Once the level is properly set unless there is a lot of needle to seat wear, the adjustment/level should never change. So your old bike may have had excessive needle to seat wear?, or just some dirt that was removed at the time of the adjustment is always possible. Your symptoms sound like a low float level or very much like dirt plugging the main jet. Any internal wear inside the float bowl would make the level higher not lower. So unless someone was fooling with the carb, sounds like you had a case with just dirt in the carby. Once again any internal wear would not lower the float level. [/QUOTE]