Reply to thread

Message

[QUOTE="Brandon H., post: 1377289, member: 104478"]
Ok I did some searching, and it seems that I am just dumb when it comes to electrical stuff. I just got done rebuilding the bottom end on my 94' YZ125 (my girlfriend will be riding it). It needed a new stator because the person i bought it from lost it, and I got one off a said "running" bike on ebay.

Well first thing I wanted to do today, while I wait for the local MX store to open tomorrow (I need topend gaskets) is check to see if there is spark. So I put everything together, put the plug in the wire, rested the plug on the head and kick.....NOTHING!! No spark.

IDK how to chase this down, and I am not the best when it comes to wiring, so expalin in fine detail where to test what.

I did set my ohm meter thingymabob to 20k, inserted one lead to the spark plug wire, and the other to anywhere else on the coil (the red or black wire, and the ground looking blocks where the bolts go). It gave me a reading of 13.12 just about everywhere. Couldn't really get a reading on different ohm settings. Did I do it right?

What do I got to do. I need to see if its the stator, coil, or CDI
[/QUOTE]

Verification

Which ocean is California closest to?