TrackMaster
Member
- Mar 15, 2001
- 212
- 0
Ok, I have tranny oil in my crankcase. My bike is a 89 rmx250. I just fixed it, broke it in yesterday. After break-in, I changed the oil, and I let it all drain out, and put the specified 650ml in. Let it cool off for awhile, then take it for a spin. Runs fine, I ride around for a little while trying to finish the break-in. It runs great all day, I have no probs, starts 1st kick everytime.
But today is a different story. Will not start for anything today. 1st thing i do is check the plug.. Milky grey wet substance all over the plug. Not again... :( Last time it did this the oil blew thru the powervalves and i changed the plug and its fixed.. This time, the oil will not come out of the crankcase. Its sitting in the bottom and i can hear it sloshing around (100% positive it is NOT gas) and i went through 5 plugs, everytime i change it, it doesnt even backfire or anything and it comes out with the milky grey stuff. This is my oil, I have a waterleak and my tranny oil is the exact same look, taste and smell.
How do i get the oil out?? I would rather not pull the top end if possible, any suggestions?? and how did it get in there??
But today is a different story. Will not start for anything today. 1st thing i do is check the plug.. Milky grey wet substance all over the plug. Not again... :( Last time it did this the oil blew thru the powervalves and i changed the plug and its fixed.. This time, the oil will not come out of the crankcase. Its sitting in the bottom and i can hear it sloshing around (100% positive it is NOT gas) and i went through 5 plugs, everytime i change it, it doesnt even backfire or anything and it comes out with the milky grey stuff. This is my oil, I have a waterleak and my tranny oil is the exact same look, taste and smell.
How do i get the oil out?? I would rather not pull the top end if possible, any suggestions?? and how did it get in there??