I took the advice of a friend who swears by Pro-Action. Of course he's a MX'er on a CR450 so the tech was perfect for him, just ok for me. I didn't realise until too late all suspension outfits weren't equal.
Not knowing better, I accepted Pro-actions recommendation (pro-action .48/eibach 8.4 straight). When I put it on the bike there was a scraping noise coming from the front. I called the tech and his response was that the .48's were slightly smaller diameter so they might be noisy. THEN I started reading - should have sooner. He will return the parts and install whatever I ask him to, so I ordered the WP parts from enduro engineering. I just want to make sure I won't be out any cash for the parts if the .44 is too small. I don't race but ride very agressively and like to hit a track one in a while.
I usually DIY everything, but had never touched bike suspension before so I wanted a pro.
Deansfastway do you got a link to MXT? Phone #? Any other thoughts on the .46 .vs .44?