Reply to thread

Message: [QUOTE="reepicheep, post: 1386025, member: 104942"] *forehead slap*. Great suggestion sr5bidder. Just get (or make) a stamped piece of metal that is held on by two of the clutch cover bolts, and is bent up over to the right position with a collar. Pretty easy to fabricate, should work great. You could probably do it with one bolt, if you bent a 1" wide strip ad just the right place so that it lays flat against both the top and side of the cover when bolted down. That'd keep it from being too flexy. [/QUOTE]