power valve

R

riggermode

Member

Aug 25, 2008

21

0

• Sep 16, 2008

• #1

hey guys i just have a simple ??????
i doing the head gasket on my 1990 yz 125 and i removed the power valve cover and it got lots of oil inside is this normal?

 

J

jake760

Member

Jun 1, 2008

74

0

• Sep 17, 2008

• #2

yep

 

B

Bigdogdaddy69

Member

Feb 18, 2008

105

0

• Sep 17, 2008

• #3

yea i knew someone with the same bike. Did the same thing. Prolly needs new seals where the rod goes into the cylinder.

 

J

_JOE_

~SPONSOR~

May 10, 2007

4,697

3

• Sep 18, 2008

• #4

There's nothing mechanically wrong. You should clean that oil out of there every time you have the motor apart. It will eventually gum up and cause the valve to stick. Make sure you are using a high quality premix for engines with powervalves. These oils burn cleaner and cause less buildup in the PV.

 

R

riggermode

Member

Aug 25, 2008

21

0

• Sep 19, 2008

• Thread starter
• #5

right on thanks guys

 

G

GarbatyA4

Member

Sep 4, 2008

110

0

• Sep 24, 2008

• #6

I'd definately inspect the powervalve for excessive free play. I'd spend the 20 bucks on new brass bushings from the dealer. My power valve had to much wear/play and started touching/rubbing the piston. Ended up replacing the piston again, and the valve.

I highhhhly recommend this. Make sure the powervalve is nice and crisp.