I've decided to buy pro taper bars. You can't change my mind on this issue, it's been decided. But I'm 6', and I want to get something that's not too short. What bend works best? I don't like much pull, and I don't like wide bars. Also how should I mount them? Should I buy the cheap adapters that go on the 7/8 barmounts or should I buy barmounts made for oversized bars? BTW, I ride a 2000 CR125. Thanks :)
CR High-Bend. I think that's what they call them. If your triple clamp has removable lower mounts, you can replace them with the Pro-Taper ones. If the bottom halves of the bar mounts are forged in with the triple clamp, you either have to replace the triple clamp or use the adapters. The adapters will raise the bars another inch or so, which may be a benefit to you.
Originally posted by johnf3 The Pro taper Cr Highs are tall, but they have way too much sweep for me. The Henry bend is nearly as high and is much straighter.
I have the Tag Cr double hi and love them. I am 6'3 and used the adapters to get the added height. I just saw a few months ago that Pro Taper just came out with a Pastrana bend that is a bit taller and straighter than the Tag Cr- double hi. Pastrana bend will be my next shot when ever I bend these...
Originally posted by fmfkx125372 I have the Tag Cr double hi and love them. I am 6'3 and used the adapters to get the added height. I just saw a few months ago that Pro Taper just came out with a Pastrana bend that is a bit taller and straighter than the Tag Cr- double hi. Pastrana bend will be my next shot when ever I bend these...