Reply to thread

Message: [QUOTE="spanky250, post: 101640, member: 20897"] Change the main to a 162, the needle to one step leaner (can't remember the number off the top of my head:confused: ) in the second from the top groove, the pilot to a 38 or a 40, and either get a leaner slide or grind 1mm off your existing slide. This combo, combined with 32:1 ratio, will rip! I think the FMF Fatty pulls harder from low to mid, but the PC will rev a little higher, and is smoother. Any exhaust system is light years better than the boat anchor that came on the bike, so you will notice a huge improvement in the power. [/QUOTE]