Reply to thread

Message: [QUOTE="canyncarvr, post: 669713, member: 16552"] Again.....you might try the 'D' taper.... Was just looking at a chart that lists the keihin 35mm pwk as 'stock' with a 6mm cutaway throttle valve. Note that the kawi 'H' kdx comes with a 5mm slide. The 6mm will help off idle response, too. Especially with the 'K' diameter. I'm using a 7mm at the moment with a DEK. These things (kdxs) can run so good with a proper carb tune....it never ceases to amaze me. [/QUOTE]