Reply to thread

Message: [QUOTE="whenfoxforks-ruled, post: 1293556, member: 73147"] Pull it apart. Wash everything with hot soapy water, and the cases. Dump it out, suck it out with a vacuum, then douche it with wd-40. Wipe, dump or suck out the excess. While you are in there check the piston and ring gaps. Oh, and pray none got stuck behind the main bearings. As long as you did not turn the engine over, a good cleaning should work. Probably about time to open the engine up anyways, do not say it is new! [/QUOTE]