Reply to thread

Message: [QUOTE="Matt90GT, post: 472342, member: 30871"] For the fork dust seals, you have 2 options. The first is to use the rubber short boot provided with the kit. It is a very stout piece, nothing like the stock rubber gaitors. Or you can run the full length or half length seal saver skins. Both designs are made to be used behind the fork sliders. For installing the brace, it is not hard. You have to drop the forks from the clamps but that is about it. Notching the fender is a bigger PIA. You basically take about a 4" half circle out of both sides of the fender. Basically from the bottom lip to the top of the fender. Like I said, there are templates provided and they will give you more upon request for free. Some say it weakens the fender a bit. On my xr600 that I had, did not make any difference. You could use a fender brace if you are really worried about it. [/QUOTE]