Reply to thread

Message: [QUOTE="RM_guy, post: 214488, member: 20652"] I picked up my SDG seat last night and it looks pretty good. It is much tackier than the stock seat and it should help keep me on the bike better but I won’t be trying it until spring. The quality is very good and the base is as stiff as the stocker. It feels like it may be slightly heavier (not enough to make a difference to me) but I didn’t have a scale handy to verify it. The weight difference is probably due to the gripper seat cover. It also looks slightly narrower at the top of the foam and it’s not rounded off as much. I’m sure the sewn seam in the cover has something to do with that but narrower isn’t a bad thing. I had ordered the ’01 RM125 seat for my ’01 RM250 because it is taller. Well, the [I]OEM[/I] seat may be taller but the SDG seat is the same for the 125 and 250. Both bikes are listed on the label. My dealer was so helpful. He knew I wanted the 125 seat because it was taller but failed to tell me that it was the same seat for both bikes. I compared it to my stock seat and it’s the exact same size. Oh well, at least I have a nice gripper seat with closed cell foam. I never had any problems with the shorter seat but thought I’d give the taller one a try since I wanted the gripper one anyway. [/QUOTE]