02 Honda's dont work that way. As stated earlier, you have to measure volume and add that amount to an empty fork.IndyYZ85 said:Take a look at the MX tech site, you should be able to find out the level in mm on there. It's probably going to be between 90 and 100 mm
IndyYZ85 said:Errr.. 02 CR250 has the exact same forks as the 2000 CR125, so I assume if you can measure oil in mine in mm, you should be able to measure it in the CR250 that way also.
Doesn't really matter right now, mx-tech.com is down right now.
James said:Err...no they dont. You can't use a suction fork oil tool to set oil level in a 2002 CR250 and You can't rationalize it to be so.
James said:Because the outer chamber oil sits down in the tube far out of reach of typical oil level tools. Also, the spring fills the diameter of the tube and even if you had a tool that would reach that deep...it wouldn't fit between the spring and tube.
If you ever had one apart (a set of SHOWA suspension from an 02 CR250 or similiar), it would be painfully obvious why it wont work.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?