Reply to thread

Message: [QUOTE="landing gear, post: 1228338, member: 80378"] I just had my 2002 CR250R torn apart, I split the case and replaced the crank bearings. I put the transmission back together according to the manual and everything seemed to work fine, I could spin the shift drum and hit all the gears. Now I got the engine back in the bike and took it for a test run, it runs great and goes into first gear fine but when I come up to hit second it goes to neutral. Every shift up from here is neutral until I get to fifth, then it goes into gear. I can shift down again and every gear is neutral until first again. Did I somehow put the shift linkage together wrong or will I have to split the case again and see if a shift fork is in the wrong position. :bang: [/QUOTE]