css_elfers
Member
- Aug 26, 2004
- 166
- 0
I went for a spin on my 98 200 today and no rear brake. I took it apart and when i took the hose off the front caliper it wasn't pushing any fluid through. Any1 ever have this problem? I looked on bike bandit and they show the part but there is only an a next to it. I unhooked the back part of the hose first and put my 2 fingers over the hole and pumped the brake, nothin. Then i just pumped the brake and a little bit of fluid came out when i didn't have my fingers over the end of the hose. Then I took the front hose lose and theres was build up at first so i connected the hose and blew through it to see if it was cloged. After that I had no build up at all when the hose was removed, so I don't know if I blew the seal. Also when I blew through the first time no bubbles came out of the resevior so I cleaned all that out. Any suggestions would be appreciated. Also sorry for my typing I also had a couple of beers while working on my bike so, you know.
Thxs
Bian
Thxs
Bian
