Reply to thread

Message: [QUOTE="xprojectstevex, post: 1021024, member: 67124"] I have never done a bottom end either but I am getting ready to. If your mechanically inclined I think you will do Ok as long as you have the service manual. You might want to get the "Clymer" brand manual, it's alot more detailed than the manufacturer manual. The manual will also tell you what special tools you will need so I would spend $20 on that before you go any further. I know for sure you will need to buy a case seperator($180 suzuki brand), clutch hub puller($50 for a universal one), and a seal press for the tranny seals(no idea on cost). I found a rm250 bottom end on **** for cheap, you might want to look on there for a 125 bottom and either keep it just in case you F**K up the one on the bike or just for parts and experience taking it apart before you dive into this one. Keep me updated on here and I'll keep you updated on mine so we can compare notes. [/QUOTE]