gr411 said:
yeah i put everything together today and took it for a rip and its runing ritch and it idles very high nomater what i do with the idle screw so im kinda stumped
1) can you pull the idle down with the choke?
2) did you clean the pilot jet good? They are small and plug easily
3) You may need to go up on the pilot with the reeds as they are stiffer than the stockers which will atomize the fuel better possibly causing a lean condition.
4) like others have stated, maybe an airleak. or throttle cable binding could cause the slide to hang up.
5) colder air temps? the colder it is, the leaner it runs.
6) you mention the idle screw, but no mention of the air screw which can affect idle. In=richer or less air, Out=leaner or more air.