Replacing brake shoes?

[acanz]

I have a question about replacing the brake shoes on my RM60 for anyone that has done it before. I already have the shoes and everything, is it as easy as pulling out the old shoes and putting in the new ones or is there more to it then that?

 

[bike_rider250]

well on my dads 1980 Susuki PE 250 there was a little clip that held them in place and i just uncliped it and out came the old ones and in went the new ones.but havent had any problems yet

 

[KDXFreestyle]

very easy, just take the wheel off, take out the allen bole pin things, and they fall out... then just do the reverse and your done. make sure to NOT hit the brake lever or else the piston will close, and you will need to pry it back open to get the disk back in. also rememer to pump the brakes back up when your done.

 

[ZeCatfish]

He said KX60 they've got drum brakes. Thats it just replace the shoes and put it back together.
Good Luck and enjoy.

 

[acanz]

Thanks alot, they did just pop right it. It felt alittle tight and was hard to get the brake unit in, but after it spun smooth and braked awesome.