Reply to thread

Message: [QUOTE="IndyMX, post: 1316422, member: 71057"] You obviously don't really understand 2 stroke bikes. First thing you should do, get a service manual. You need to understand the basics of how that bike runs before you start working on it. There's no oil you can change every few days to flush out the crank bearings. The crank bearings and bottom end of the piston (wrist pin, con rod bearings and all) are lubricated thru the premix. By changing your transmission oil you won't do anything to help the bottom end of the engine. So.. Do like I suggested, and tear it down properly, and clean it thoroughly, or you will most likely have to replace the crank, bearings, con rod, wrist pin and seals. Not to mention the good possibility that you'll need to either have the cases welded or replaced from the chunks of broken con rod blasting thru them. [/QUOTE]