Rm 250 Mix Ratio

2

250RM

Member

Apr 5, 2007

7

0

• Apr 17, 2007

• #1

I was wondering what ratio's you guys are mixing your oil and gas for your RM 250's. My buddy told me 31:1 is that anygood? also what plug should i be using a BR9es?

 

S

snb73

Member

Nov 30, 2003

770

0

• Apr 17, 2007

• #2

40:1 for my 03. I use a BR9EG.

Good luck, Steve.

P.S. I use MOBILE MX2T (fully synthetic)

{I heard around from my friends mothers brother in law, that is is ok}

 

Last edited: Apr 17, 2007

M

mx47blue

Member

Dec 3, 2005

13

0

• Apr 17, 2007

• #3

but if you are going to go that ratio (40:1) you must make sure you you a good quality 2-stroke oil like Motorex 2t racing 2-stroke oil

 

2

250RM

Member

Apr 5, 2007

7

0

• Apr 17, 2007

• Thread starter
• #4

i use bel ray h1r oil and is that good enough?

 

8

84cr125

Member

Apr 8, 2007

292

0

• Apr 17, 2007

• #5

ive heard around that cr's should be mixed in the 30's not 40's. Just thaught i would pass that on.

 

9

95xr250

Member

Apr 6, 2007

95

0

• Apr 17, 2007

• #6

32:1 can't go wrong with that. And i strongly recommend using Klots high quality and smells great.

 

D

DannyMoto07

Member

Apr 12, 2007

170

0

• Apr 18, 2007

• #7

Yeah, don't go less than 40:1... (41:1+)... keep it in the 30's and you'll be fine. Won't hurt to go a little extra. Anything more than 25:1 will end up smoking and clogging your pipe up really quickly... probably foul a few plugs in the process too.

I've used AmsOil HP injection 2-stroke oil and I've never had a problem. Really nicely produced oil. Plus, it's cheaper than Motul or Yamalube...

Dan