Thanks for the replys
wow, I didnt figure I would get very many answers
on this specific question.Thanks.I am having a problem
that I believe to be carburetion since I just had the whole
motor gone thru and ported.The bike before doing the
motor would run on after climbing a hill and acted like a
air leak,which I know couldnt be now since the rebuild.
It now after getting hot after about a hour of riding just
runs on like it running out of gas and when you start
applying throttle it goes away untill you let off the throttle
again.Too much compression,not enough octane,ect,ect.
I dont know,but to far into this bike with redone suspension
and everything to give up on it.
Any ideals please help.
Thanks overbore.