Reply to thread

Message: [QUOTE="JOHNOMCK, post: 769753, member: 53494"] Hi, Any advice would be greatly appreciatied. Bike wont start unless I put a new plug in the bike. 1997 rm250, ignition coil checked out okay at the shop today, the stator was recently replaced by the previous owner within the last few months, I have a very weak spark, I can hold onto the plug while kicking the bike over. It seems there is not a CDI check that any local shop can do. Is the ohm meter check the manual suggests reliable, or do I have to spend 380 bucks for a new cdi and not really know if thats the problem. Thanks John [/QUOTE]