Reply to thread

Message: [QUOTE="SULLY, post: 770730, member: 30208"] 8 Ohms is very little to be short, what was the total figure (100 ish?), so 8 is v little and would be unlikely to be enough to cause your pb.Make sure the HT lead is screwed into the plug cap, and CDI unit properly. If you have access to a similar bike, try to swap components over, starting with the HT lead, they can crack internally and weaken the spark, especially when it all warms up and the insulation on the plug lead gets more flexible allowing any cracks in the conductor to move around. [/QUOTE]