argclh6670
Member
- Jan 27, 2013
- 37
- 0
hey guys, i've been fooling around with my jetting since i swapped the ole keihin pj for a pwk. im heading out tomorrow determined to deal with the hanging idle issue i have going on. i know that a hanging idle is usually due to a "lean" or "airleak". i just checked for leaks this afternoon, all seems good. So, which circuit is normally responsible for a hanging idle? Providing i cant ake care of it with the as. pilot or needle, clip position? carburetion makes me :coocoo:
All help is appreciated thanks.
All help is appreciated thanks.
