Reply to thread

Message: [QUOTE="rmxfixme, post: 97937, member: 16548"] I finally ordered the correct springs for my weight (0.41-175 lbs-enduro) from Race-Tech. The say I need to install "custom" 15mm spacers (I guess the springs they sell are too short for this application). The bike is a 1994 RMX. The forks are inverted Showa's. I would guess that a 15mm thick "washer" placed on top of the spring before the cap is threaded on is what I need. I have access to a machine shop so I was going to turn them myself. I need ID and OD and any other details, if available. Thanks Brian [/QUOTE]