Ok Rich,
I got my head back from Kibblewhite and they did an awesome valve job!
Bored the throats of the intakes, recut the bowls to unshroud the chamber...
After I measure the volume of the chamber I will assemble the top end.
Then I can make a fixture to hold the indicators over the buckets squarely.
And last but not least what do you recommend for lobe centers?
Are you using .050" lift for zero?
Are you shimming to zero lash as well?
This is the first bucket motor I have done and I feel kinda lazy, like I don't wanna shim it to zero. I never thought I would miss rockers!:eek: