SDG Pit Bike (HELP)

P

polarisracer242

Member

Nov 9, 2009

3

0

• Nov 9, 2009

• #1

I have a sdg pit bike cant get it to run, shut it off and they wont start has spark once and awile. What should i do, new motor, CDI, Stator.

 

H

helio lucas

~SPONSOR~

Jun 20, 2007

1,020

0

• Nov 10, 2009

• #2

polarisracer242 said:

new motor, CDI, Stator.

Click to expand...

that should solve your problem. :think:

if has spark one in a while it will be a 6 stroke, or is 8 stroke? now that you have more strokes than everyone else, you are fast...

step one: replace the spark plug with a new one.
step two: inspect the wireness and all the connectings, including disconnect the kill switch.
step 3: inspect visualy the stator.
if after all this work it wont just ask again in this thread.

 

P

polarisracer242

Member

Nov 9, 2009

3

0

• Nov 10, 2009

• Thread starter
• #3

I put a new plug in it and that didnt work. I looked at the wiring and it looks good. So im thinking its probley the stator.

 

Patman

Pantless Wonder

LIFETIME SPONSOR

Dec 26, 1999

19,765

1

• Nov 10, 2009

• #4

That is a common fail point, the coil is another possible problem but not real common.

 

H

helio lucas

~SPONSOR~

Jun 20, 2007

1,020

0

• Nov 10, 2009

• #5

Patman said:

That is a common fail point, the coil is another possible problem but not real common.

Click to expand...

yap :nod:
they just slowing degrades until have no spark or misfiring on peak torque.
a internal rotor kit usully is a very cheap replacement for the entire electrical system. keep in mind that most don´t come with lights generator.
cdi's on those bikes are almost bullet proof.

just don´t look at wireness, inspect it. disconnect all plugs and check for corrosion and shorted cables.

 

P

polarisracer242

Member

Nov 9, 2009

3

0

• Nov 10, 2009

• Thread starter
• #6

I looked at the wireing and nothen is broke or no corresion. so i will just get the new wiring system