420_darkside_420
Member
- Apr 18, 2007
- 7
- 0
i recently bent my shift shaft while hitting jumps , i had to cut it out of my engine.
i have a spare shift shaft but the top mount is different,
i was wondering if i could use a metal laith to cut the welds then switch the mounts then re weld it to the good shaft.
think it will work?
thanks- steve.
i have a spare shift shaft but the top mount is different,
i was wondering if i could use a metal laith to cut the welds then switch the mounts then re weld it to the good shaft.
think it will work?
thanks- steve.