Reply to thread

Message: [QUOTE="marcusgunby, post: 69854, member: 17066"] I checked and i think it was 7*24.1(2*24.15=7*24.1 approx) 12.1 20.1 18.1 16.1 14.1 11.25 So the 2 extra 24.1's will help compensate for the 12mm cross over the 16 is smaller than the 17 you used and the 12.1 isnt used.Give us feedback on that stack and if HSC is too much then you could go to a 10.25 to reduce HSC-it will have a small effect on the total damping but it may be the answer.The 520 sx i beleive runs a similar HSC stack so i wouldnt think we need more HSC-but ive been wrong before and will be again. ------------------ [/QUOTE]