should there be a gasket here?

B

Butcher-Boy

Member

Feb 18, 2006

19

0

• May 15, 2006

• #1

99 yz 125, I noticed tonight that there was no gasket between the v-force reed cage and the engine block. could this contibute to my stutter problem? The cage is hard plastic agaist aluminum. If so could I make a gasket out of cork sheet?

 

E

elcamino12sec

Member

Jan 16, 2006

412

0

• May 15, 2006

• #2

You can get gasket paper at an auto parts store and cut one out with a razor blade or exacto knife set for allot cheaper than buying one from the bike shop. Just trace it with a pencil then trim. As for the stutter, I would try a gasket first, and yes, there should be a gasket there.

 

S

souphmars

Member

Mar 8, 2004

155

0

• May 16, 2006

• #3

yes there should be a gasket there - there should be a gasket between the block and the v-force and between the v-force and the boot that hooks to the carb

 

X

xr250rob

Member

May 12, 2006

7

0

• May 16, 2006

• #4

get a reed spacer they work great

 

B

Butcher-Boy

Member

Feb 18, 2006

19

0

• May 16, 2006

• Thread starter
• #5

Thank you! Your help is much apreciated.

 

C

ctrlaltdl

Member

Apr 14, 2006

24

0

• May 16, 2006

• #6

My 95 just has a small poly (or urithane?) ring there.

 

C

ctrlaltdl

Member

Apr 14, 2006

24

0

• May 16, 2006

• #7

No gasket on this diagram:

http://www.bikebandit.com/partsbandit/showschematic~dept_id~399727.asp