Reply to thread

Message: [QUOTE="Magellan, post: 1433479, member: 22253"] That would make sense. the oil was a bit on the sludge side, and there is nothing on the crank. It was just on the piston and cylinder. It sounds like I can probalby get away with reasembling and a Leakdown test to check things out. We probably only have about 8 weekends to ride before the weather turns and we start thinking about snowboarding. I'll have time to rebuild the crank over the winter to address the bearing play. Thanks. I'll report back on the LD test in a few days. [/QUOTE]