Reply to thread

Message: [QUOTE="steve.emma, post: 1230258, member: 36039"] i have used a dial gauge to check and set timming on all my 2stroke bikes and in my opinion the threaded plug hole type is a lot easier. i aggree its no more accurate but its easier for someone who is less skilled in using this type of measuring equipment. the mag base type are fiddly to set up and on alloy framed bikes they can be near impossible to stick to any flat surface near the head. however i also agree its expensive to buy the adapter if you are not going to use it very often.... so do what i did and make your own! i basically modified a old spark plug metal body to fit my dial gauge then drill and tapped a hole on the side of the plug body for a lock screw to secure the dti. cheap to make and as long as it securely locks the dti and does not allow it move then it will work as good as a bought one for a lot less cash! [/QUOTE]