specs on '00 CR250 carb

RebelBanshee · Nov 5, 2007

I may be picking up a '01 CR250. I read about jetting troubles with the mikuni carb, and replacing it with the '00 keihin PWK.

I already have a 38mm Keihin PWK airstriker that i bought for my TRX250R along with a pile of jets. However I'm under the impression that there are two different lengths of these PWK airstrikers. I am unsure what mine is. anyone know the length of he CR carb? Also what is the slide number and needle used for the CR?

Thanks alot!

allthingsdirt · Nov 5, 2007

Sorry I can't help you with the specs on the PWK carb. But I can tell you that the TMX carb isn't that hard to get jetted properly.

All I've done is swap out the s-9 nozzle for an s-7 ($20.00) and go one size leaner on the pilot jet and that has made a world of difference for the bike.

If the price is right you should definitely pick up the '01 cr250. It's an awesome bike. :cool:

Cheers

ZOMBIE666 · Nov 5, 2007

i picked up a pwk last week for mine, the slide is a #7 but dont remember the needle or body leingth. there is a really good thread about the pwk swap:

http://www.dirtrider.net/forums3/showthread.php?t=86427&highlight=pwk+converts

RebelBanshee · Nov 6, 2007

Im most interested in potentially doing the swap because I already have the carb, have a buttload of jets, and know the carb pretty well.

Thanks for the link, looks like i should be able to find what i need there :cool:

specs on '00 CR250 carb

RebelBanshee

allthingsdirt

ZOMBIE666

RebelBanshee

Similar Topics

Privacy & Transparency

Privacy & Transparency