Reply to thread

Message: [QUOTE="Layton, post: 397085, member: 19387"] If you try taking the flywheel off like that you will have more to worry about then just splitting the cases. Get the proper flywheel puller from your dealer before you ruin the flywheel and or crank end. :( While you are at the dealer getting the puller also pick up a service manual for the bike. You will need it to figure out where all the shims etc. go that fall out of the case when it comes apart. Actually once the flywheel is off the rest is usually fairly easy. Just take your time and CAREFULLY tap the case until it comes apart. Good luck. [/QUOTE]