Reply to thread

Message: [QUOTE="MN KDXer, post: 278671, member: 16126"] C-Carver, You again... ;) A couple of extry mm of preload is NOT going to break the bank, and yes, the springs WILL sag slightly. Up here in snowmobile land, clutch springs commonly will lose a little of their tension/height after a week or so, which makes calibration a moving target if you are calibrating with a brandy new spring. Even the best of the best springs will lose a little tension. BTW, There is not 20-30 shims in a GV fork stack. Try more like 10 or so. The shock has about 17 on the compression stack. [/QUOTE]