Just wondering if they make spacers for the sprocket spindle to kick it out. my front sprocket is not lining up w/ the rear, and if i could get a spacer or washer to push the front sprocket away from the engine i think i'd line up.
Nope. Sounds like you have a problem with your rear wheel. Could be wrong spacer on axle or bent swingarm. Most likely it is simply not aligned right on your chain tensioners.
well i found out the problem. when i was putting my bike back together, i somehow switched the collars in the swingarm around. the right side is about a 1/2" longer than the right, and i had 'em switched. so went through and changed them, and it looks fine.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
